It’s a dream come true as you finally have your decorative concrete with stamps, which you probably planned for months for your driveway restoration project. However, since there are outdoor factors that you cannot control, the floors are faced with challenges.
Cracks and scratches are inevitable, so you must get a stamped concrete repair.
With stamped concrete floors, damages and flaws seldom happen, but minor issues can still cause worries to most homeowners.
Also, suppose the decorative floors are located among commercial areas. In that case, you need to have regular maintenance that may include quick decorative restoration, some of which you can do independently.
Common Minor Concrete Repair
We list down the common minor flaws that can happen to your exterior concrete floors.
It also happens to be easy to fix that you need some simple steps to follow and do temporary fixes on your own. Read on.
DIY First Aid To Cracks
Cracks are a common issue that surfaces on concrete floors. New or old, and major to minor.
For small and shallow cracks, DIY repair is enough to save the concrete from breaking into large pieces but sometimes help from concrete contractors Corpus Christi is needed.
You will need to perform a quick crack patching or crack filling to avoid the worse.
To aid you in doing this like a pro, you will need to get a premix concrete patch compound. Apply the mixture using the following tools:
- Bucket for mixing
- Thick sponge
Get your hands on the repair tools above. Follow the instructions on the premix concrete patch compound and fill the tiny cracks with it.
Use the concrete filling sponge to spread the mix on the surface to keep it looking seamless and polished or spread and fill the small crease.
DIY Restore Chipping Surfaces
Small areas with chipping concrete would mean that the concrete sealers are fading and need resealing.
One way to DIY repair chipping concrete floor is to reapply a micro-topping of concrete mix.
Scaling can appear in different thicknesses. If the scaling is at less than 1 inch, then that is the time you can apply a DIY solution on it.
If scaling happens thicker than an inch, a professional flooring contractor is the best person to fix it.
That would involve replacing the concrete’s top layer, or in most projects, professionals call it resurfacing.
This issue tells you about a loss of mortar coating. The fix is replacing the mortar and finishing the surface with a sealer.
However, if scaling did happen, the best option is to have professionals fix it. Most scaling would be identified as severe damages, especially those with compromised concrete strength.
Efflorescence happens when the surface gets too much moisture, and the concrete starts to become whitish.
That whitish material is a reaction of salt to emerge other surfaces coming to form the cement compounds. This effect happens in certain small areas on the concrete surface.
Do not panic when efflorescence occurs. The quick way to erase this flaw is with vinegar and water solution.
Also, if you do not like to use vinegar, a ready-made acidic solution is produced to remove efflorescence.
Be careful when taking the DIY path. First, ensure if the damage can be fixed with minor aid.
If unsure of what to do, you should call a professional stamped concrete contractor to get the job done right!